SIPX features

The leading open source communications system for RHEL

sipXecs is a distributed, open source IP communications system: SIP call control, unified messaging, conferencing, contact centre, IM and presence, all managed from one web console. Release 25.01 runs on Rocky Linux 9 with a fully modernised Java 17, Jakarta EE 10, Spring 6, Hibernate 7 and Jetty 12 stack.

What is in the box

Every service is included in the open source release.

Distributed call control

A SIP proxy architecture. Media flows directly between phones and is anchored only for trunk and media service calls, so the servers scale with your network.

High availability

Up to three-way redundant, geo-redundant via DNS SRV, with real-time state replication and automatic recovery.

One web console

sipXconfig manages every server, user, phone and gateway in the cluster, with LDAP and Active Directory sync.

Plug and play phones

Auto-provisioning and firmware management for Polycom, Yealink, Cisco, Snom, Grandstream, Mitel and AudioCodes.

Unified messaging

Voicemail with email delivery, personal auto attendants and 16 language packs.

Conferencing and ACD

FreeSWITCH conferencing up to 500 ports per server, plus contact centre queues with agent presence.

IM and presence

Openfire XMPP server with auto-provisioned accounts, group chat, federation and phone presence.

Branch offices

Locations, local gateway routing, branch-hosted services and survivable branches with AudioCodes SAS.

Trunking and routing

SIP trunking with NAT traversal, least-cost and time-based routing, and automatic gateway failover.

sipXecs vs Asterisk vs FreePBX

All three are proven open source platforms. They are built very differently: Asterisk is a telephony engine, FreePBX is a PBX GUI on top of it, and sipXecs is a distributed SIP system designed for multi-server enterprise deployments.

Built inPartial, add-on or custom workNot available
CapabilitysipXecsAsteriskFreePBX
Platform and licensing
LicenceLGPL 2.1GPLv2 (commercial licence also offered)GPLv3 core plus paid commercial modules
Primary platformRocky Linux 9 / RHEL 9 familyMost Linux distributionsDebian 12 (FreePBX 17)
What you deployComplete UC system: call control, media, management, IMTelephony engine and toolkit; you build the PBXWeb GUI and modules on top of Asterisk
Application stackJava 17, Jakarta EE 10, Spring 6, Hibernate 7, Jetty 12, MongoDB 8C engine, flat-file configurationPHP application, MariaDB, Asterisk
Architecture and scale
Call control modelSIP proxy and registrar (RFC 3261); media anchored only for trunk and media service callsBack-to-back user agent; every call anchored in AsteriskSame as Asterisk
Media pathPeer to peer between phones; anchored for trunk and media service callsThrough the server by default; direct media configurableSame as Asterisk
Transcoding between phonesCodecs negotiated end to endDone on the server when codecs differSame as Asterisk
Multi-server cluster managed as one systemBuilt in; assign roles to servers from the web UISeparate servers joined by trunks or custom designSeparate systems joined by trunks
Distributed service rolesProxy, registrar, media, conferencing, IM, ACD and CDR on any nodePossible with custom engineeringNot in core
Documented capacityUp to 10,000 users per dual-server HA system; 54,000 BHCC (120,000 redundant)Hardware and dialplan dependent; one server per instanceHardware dependent; one server per system
Configuration storeMongoDB replica set across cluster nodes; PostgreSQL for CDR.conf files; optional Realtime databaseMariaDB generating Asterisk configuration
Resilience
Redundant call controlUp to three-way redundant, load sharing in normal operationExternal tools such as Pacemaker, Corosync or a SIP proxy tierCommercial or third-party HA solutions
Geo-redundancyDNS SRV based, no shared-storage cluster requiredCustom designCustom or commercial
Real-time state replicationRegistrations and subscriptions replicated across nodesNot built inNot built in
Branch officesLocations, local gateway routing, branch-hosted servicesSeparate instance per branchSeparate system per branch
Branch survivabilityAuto-configured AudioCodes SASCustomCustom
Gateway and trunk failoverAutomatic on unavailable or busyThrough dialplan logicTrunk sequence per outbound route
Administration
Web administrationsipXconfig manages the whole clusterNone built in; config files and CLIFreePBX admin GUI
User self-service portalVoicemail, find-me/follow-me, call history, phonebook, personal auto attendantNone built inUser Control Panel
Active Directory / LDAP syncScheduled sync with graphical query and previewRealtime LDAP or custom scriptsUser Manager directories
Bulk CSV import and exportUsers, phones and devicesScriptsBulk Handler module
Scheduled backup and restoreBuilt in, cluster wideScriptsBackup and Restore module
Dial planGUI rules: time based, least cost, permissions, plug-in redirectorsDialplan language; fully programmableGUI routes plus custom dialplan
Software upgradesGUI based, all serversPackage manager or rebuildModule Admin
Protocols and telephony interfaces
VoIP protocolsSIP over UDP, TCP and TLS; XMPP for IMSIP, IAX2, plus MGCP, SCCP, UNIStim and H.323 via add-onSIP and IAX2 via Asterisk
ISDN and traditional telephonyPRI, BRI, FXS and FXO via SIP gatewaysPRI, BRI, E&M, FXS and FXO via DAHDI cards or gatewaysVia DAHDI cards or gateways
Session border controller (SBC)Built-in SIP trunking SBC (sipXbridge) and media relay for NAT, plus external SBC supportNAT handling built in; separate SBC recommendedNAT and firewall module; separate SBC recommended
SIP trunkingProvider templates, registration and NAT traversal; multiple trunks and providersPJSIP trunks with registration and authenticationTrunks module with GUI setup
GatewaysAuto-configured AudioCodes plus any SIP gateway; per-location routingAny SIP gateway, configured manuallyAny SIP gateway; auto-configuration is commercial
CodecsBroad codec set via FreeSWITCH, including G.722, G.729 and OpusBroad codec set including G.722, G.729 and OpusVia Asterisk
TranscodingBuilt in, via FreeSWITCH media servicesBuilt inVia Asterisk
Multi-site routingOne cluster with site-to-site routing, DNS SRV and NAPTRDUNDi, ENUM and IAX2 trunkingTrunks between systems
Call scripting and CTIREST third-party call control and plug-in redirectorsAGI, AMI, ARI and outbound call spoolingVia Asterisk
Phones and endpoints
Phone auto-provisioningBuilt in: Polycom, Yealink, Cisco, Snom, Grandstream, Mitel and moreExternal toolsBasic open source module; full Endpoint Manager is commercial
Gateway plug and playAudioCodes and other SIP gatewaysManualCommercial Endpoint Manager
Firmware managementCentralisedManualCommercial Endpoint Manager
Softphone provisioningBria, Jitsi, Zoiper with SIP and XMPP accountsManualVaries by client
WebRTC browser callingScheduled for sipXecs v27.01Built inVia Asterisk
Calling and collaboration
PBX call featuresTransfer, hold, call waiting, pickup, DND, forwarding, caller ID controlsTransfer, hold, call waiting, pickup, DND, forwarding, caller ID controlsTransfer, hold, call waiting, pickup, DND, forwarding, caller ID controls
Emergency calling (E911)Dedicated emergency routing with email and SMS alertsThrough dialplanEmergency outbound routes
Speech and text to speechNot built inTTS and speech recognition integrationsText to speech module
Voicemail and unified messagingEmail delivery and notificationapp_voicemail with IMAP storage optionVoicemail module
Auto attendantsUnlimited, nested, plus a personal auto attendant for every userBuilt in dialplanIVR module
ConferencingFreeSWITCH, up to 500 ports per server, multiple conference serversConfBridgeConferences module
Call recordingConference and call queue recording onlyRecord any call, on demand or always onPer extension, route, queue and conference
Contact centre queues (ACD)Ring all, circular, linear, longest idle; agent presenceapp_queue with many strategiesQueues; advanced reporting is commercial
Hunt groups and find-me/follow-meSerial and parallel, time basedDialplanRing groups and Follow Me
Park, paging and intercomPark orbits with BLF, paging groupsBuilt inModules
BLF and presence serverBroadSoft and IETF compatible resource list serverDevice hintsVia Asterisk hints
Shared and bridged line appearanceShared appearance agentLimitedLimited
XMPP instant messaging serverOpenfire with auto-provisioned accounts, group chat, federationSeparate server requiredSeparate server required
Presence-based call routingIM status drives routing, e.g. DND to voicemailCustomNot built in
Integration and reporting
APIsREST APIs for administration, users and call controlARI (REST and WebSocket) and AMIGraphQL API plus Asterisk ARI and AMI
Call detail recordsCollated call legs, active calls, CSV export, Jasper reportsCDR and CEL to database or CSVCDR reports
SNMP monitoring and alarmsSNMP agent with alarm trapsres_snmp moduleOS-level tools
Security and support
TLS / SRTPBuilt in: end-to-end TLS and SRTP for phones, trunks and all media services, including FreeSWITCH, conferencing, voicemail and queuesTLS and SRTP (SDES and DTLS)TLS and SRTP via Asterisk
Intrusion protectionFirewall, fail2ban and APIBAN integrationExternal tools such as fail2banFirewall module
Login and audit historyLogin history and system audit logNot built inLogs
Commercial SLA supportFrom the sipXecs development team, from $200 / monthSangoma and partnersSangoma and partners

When sipXecs may be the better fit

  • You are stuck on CentOS 7 and want to stay on RHEL with Rocky Linux.
  • You run several sites, or need to scale out across servers with redundancy built in.
  • You manage hundreds or thousands of users and phones from one web console.
  • You want voicemail, conferencing, contact centre, IM and presence in one open source system.
  • You want SLA support directly from the development team.

When Asterisk / FreePBX may be the better fit

  • You need analog or TDM cards installed directly in the server.
  • You need WebRTC browser calling today (scheduled for sipXecs v27.01).
  • You need every call recorded, for example for compliance.
  • You want to program every call flow in a dialplan language.
  • You run a single small site and prefer Debian and a large module marketplace.

Comparison based on the open source editions and their public documentation as of November 2026 (sipXecs 25.01, Asterisk 22, FreePBX 17). Capacities depend on hardware and configuration. Asterisk and FreePBX are trademarks of Sangoma Technologies. Spot something out of date? Email support@onrelay.net and we will correct it.

Run sipXecs with the team that builds it

SLA support, upgrades and Tier 3 engineering from the sipXecs development team.